Canada
U.S.A.
International
Proudly Canadian
PIONEER STEEL BUILDINGS ARE BUILT IN CANADA
CANADIAN MADE FOR WORLD-WIDE TRADE
Pioneer Steel Manufacturers Limited is a Canadian owned and operated steel buildings manufacturer. We adhere to the highest standards of manufacturing with our pre-engineered steel buildings. The quality of our prefab metal buildings is synonymous with quality Canadian craftsmanship.
From quonset buildings to peaked roof steel arch buildings, we construct all our prefab buildings using 100% AZM180 Galvalume Plus™ steel.
ArcelorMittal Dofasco, a steel mill located in Hamilton, Ontario, exclusively makes this steel for Pioneer Steel. The manufacturer makes Galvalume Plus™ steel panels from a unique aluminum-zinc alloy. This provides superior corrosion resistance and heat reflectivity.
Pioneer Steel buildings source their steel domestically. This allows us to buy high-quality material in large amounts at a lower price. With lower shipping costs and our own manufacturing, we can pass these savings on to our customers.
Distributors sell Pioneer Steel buildings all around the world. We have representation in many countries including Japan, Italy, England, Ireland and Chile to name a few.
MAKE SURE YOU’RE BUYING THE BEST
Pioneer Steel buildings are made with superior steel. Not all manufacturers of steel buildings use Galvalume Plus™ (AZM180) steel. We use the thickest coating of Galvalume Plus™ for all gauges. And we automatically include longer and higher-grade bolts for 18 gauge and thicker buildings.
Most of our competitors use AZ55 alloy on 22- and 20-gauge buildings and a galvanized coated steel for 18 gauge and up. These alloys don’t allow our competitors to offer even half as long of a warranty as we do. Galvalume Plus™ guarantees our buildings against corrosion for 50 years.
CANADIAN BUILDING STANDARDS
CSA-A660
As per the National Building Code of Canada (NBCC) Section 4.3.4.3 - It is mandatory that all Steel Building System manufacturers supplying buildings into Canada must be certified to the requirements of CSA-A660. Pioneer Steel is proud to meet all requirements of CSA-A660 Quality Certification for Steel Building Systems, and is Canadian Welding Bureau certified to CSA Standard 47.1 for fusion welding of steel.
Because the manufacturer of these buildings is often remote from the building site and buildings are frequently sold through a dealer or contractor, and because local code enforcement officials may lack the capability to check the structural analysis of a building, problems may occur in determining the acceptability of such structures. It is the intent of this Standard and the accompanying certification program to help alleviate such problems.
This Standard requires that the manufacturer's production facilities, staff, and quality assurance systems be capable of reliably producing acceptable steel buildings. To ensure that these design and production capabilities are met and maintained, the Standard requires a manufacturing facility to be certified by a certification agency. In turn, the manufacturer certifies each building for a specific location by means of a certificate of design and manufacturing conformance, signed and sealed by a qualified professional engineer. This certificate lists key design criteria for review by code enforcement officials.1
1 https://www.csagroup.org/store/product/A660-10/
HIGH EMPLOYMENT STANDARDS
Pioneer Steel Manufacturers Ltd. is proud to be an inclusive, equal opportunity employer. We adhere to our provincial labour code and federal law where applicable. We value the dignity of our employees and that shows in our superior product. This value is important to us, our employees and our customers.
WE’RE HERE TO SERVE YOU BETTER
Located in Mississauga, Ontario, Pioneer Steel is a leading-edge manufacturer of dependable, pre-engineered steel buildings. Our distributors sell Pioneer Steel buildings all across Canada.
We have a team of distributors to help you. Our engineers are also available by phone. You can reach them at 1-800-668-5422 for extra help with applications and technical questions.